| 1. | For all gas lines , all joints shall be orbital welded to minimize pressure fittings
所有气体管路的连接为无缝焊接。 |
| 2. | All individual applicants ( including all joint applicants ) must sign this application form
所有个别申请人（包括所有联名申请人）必须签署本申请表。 |
| 3. | Registered machine fits and positive sealing o - ring seals at all joints ; easy replacement
在所有连接点均配置拥有专利保护的机械式适合的、积极的o型密封垫圈，更换简便易行。 |
| 4. | Finding system status screen . checking all joints connecting with communication system have been correctly functioned
调出系统状态画面，检查连接在通讯系统上的各节点已正确组态。 |
| 5. | Based on the actual detected spatial intersected curve , the simulation to the angle - variation of all joints was done
结合实际扫查的空间相贯曲线，对各关节的运动位移进行了计算仿真。 |
| 6. | Compress all joints by placing besser blocks over them for ensuring good adhesion between the top layer material and the underlying concrete base
同一方向铺设表层（黑橡胶粒预制板） 。板间为材料的胀缩留下缝隙。 |
| 7. | All joint shareholders must sign . for a corporation , this form should be executed under its company chop and signed by its authorised representative ( s )
所有?名股东必须签署。股东如属法人团体则表格须由正式授权人签署和加盖公司印章。 |
| 8. | The cdc2 project of daikin fluorochemical ( china ) co . , ltd , with all joints connected with bolts , complicate stucture and short time limit , was acclaimed byclient from japan
大金氟化工（中国）有限公司cdc2项目所有节点全部采用螺栓连接，结构复杂，工期短，获得日本客户好评。 |
| 9. | Panel zones usually are very ductile elements capable of undergoing severe inelastic strain reversal without a decrease in strength . maximum strength and stiffness of frames is attained when all joints are design for the maximum shear force that can be developed based on the strength capacity of the members framing into joint
可以说整个框架的强度、刚度很大程度上依靠节点域的抗剪性能，通过加设补强板的方法，可以改善框架在侧向力作用下的承载力，刚度和抗震性能。 |
| 10. | The difficulties in studying the coordination for multiple robots is that all joints of robot are no longer independent because of the constraints by the touch between the robot and object and that the new system consisting of robot and object no longer owns some good characters by single robot such passity as so on . therefore some control algorithms being suitable for single robot is not probably avail for multiple robots
多个机器人协调控制的困难在于：多个机器人与物体接触形成的约束关系使得机器人的各关节不再独立，也使得由机器人与物体组成的新系统不再拥有单个机器人具有的一些很好的特性，如被动性等，因此适应于单个机器人的控制法可能对多个机器人失效。 |
